Every Parkwest Arms rifle is a union of disciplined craftsmanship and precise engineering, where time-honored artistry meets modern performance. This unwavering commitment guides every stage of construction, from the careful selection of properly air-cured wood blanks and precision-machined steels to the final hand fitting and finishing of each rifle. The SD-22 Long Rifle carries these principles forward in a rimfire platform designed for accuracy, refinement, and purposeful training.
The SD-22 Long Rifle continues the Parkwest Arms tradition established by the SD-76 rifle models, preserving the balance, fit, and confident handling of our centerfire rifles while offering purposeful accuracy for training, small game hunting, and field practice. Crafted with carefully selected air-cured wood blanks, precision machined steels, and meticulous hand fitting, the SD-22 Long Rifle stands as a symbol of authority, discipline, and the enduring standards that guide every rifle bearing the Parkwest Arms name.
Specs
- The SD-22 long rifle is built for hunters and marksmen who understand that precision begins with fundamentals and demands a rifle crafted without compromise
- Certified excellence ensures every rifle is individually hand fitted, range tested, and proven ready before bearing the Parkwest Arms name
- Full scale rimfire design mirrors centerfire balance and handling
- 1/2 inch 5-shot group at 50 yards
- Approximate weight of 7.5 pounds
- Overall length of approximately 41 inches
- Fully hand polished
- Ships with custom rifle case
Action
- Available in right-hand and left-hand configuration
- Blueprinted action ensures precision and reliability
- Chromoly steel construction
- TriggerTech adjustable trigger
- Five-round detachable magazine (two included)
- Dual extractors
- Side bolt release
- Matte blue finish
Barrel
- Barrel length of 23 inches (custom lengths available)
- Match grade barrels with Bentz chamber for precision rimfire performance
- Barrel threads individually matched to receiver within .0005″ for precision fit
- Custom barrel options: manufacturer selection, contour, and length
- Sporter contour
- Chromoly steel
- Matte blue finish
Stock
- Each rifle features hand-selected, air-cured walnut stock with hand-rubbed oil finish
- Length of pull: 13-5/8″ standard, custom lengths available
- Premium walnut stock with hand-rubbed oil finish
- Classic grip cap with Parkwest Arms medallion
- 1/2″ or 1″ black recoil pad
- Classic swivel studs
- Optional Upgrade – Hand-cut checkering available
Sights
- Talley scope bases
- Matte blue finish
The three position safety is located on the bolt shroud for easy access and is important for several reasons; Rear Position – bolt handle is locked in the down position, firing pin is locked, rifle is safe. Mid-Position – Bolt will operate but firing pin remains locked, “ready position” rifle is safe. Bolt Can be operated safely to unload the rifle or to safely chamber a round if stalking game. Foward Position – Fire! Everyone must follow all standard procedures of firearm safety. Refer to the 10 commandments of gun safety for reference.
True controlled round feed in a bolt action rifle is when the extractor captures the cartridge as it comes out of the magazine thus controlling the cartridge as it goes into the chamber. The cartridge is always held in place “controlled” by either the magazine or the bolt. This was originally developed for the military to assure 100% reliable feeding regardless of position or movement during operation. The cartridge is held in the bolt face by the claw extractor and cannot fall out or become misaligned even if held upside down. This also prevents “short stroking” a cartridge, that is when the bolt is started forward enough to start a cartridge into the chamber, then pulled back “short” of chambering and another round picked up from the magazine. This is most prevalent in “push feed” rifles when operated in a hurry for follow up shots.
The full length claw extractor is simply the most foolproof, 100% reliable method to extract cases from the chamber, with a full .395″ wide extractor “claw” to engage the extractor groove. It will be reliably extract the most stubborn case. In the past cases were subject to swelling or corrosion in the hot, humid conditions found in Africa. Today the weather is the same but cartridge cases are made to a higher quality but still subject to external conditions that could cause sticking. Dirt, deformed bullets or excessive case expansion can effectively disable a rifle if the extractor is not up to the task.
The Mechanical ejector is a spring loaded blade of steel that rides in a relief cut in the bolt, as the bolt is pulled back with the case captured in the “controlled” feed the blade will physically push the case out of the action, the force of ejection depends on the effort of bolt operation. This is another holdover or benefit from military bolt action rifles like the Mauser which provides 100% reliable ejection of fired cases from the action. Plunger style ejectors (on a “push feed” system depend on a spring loaded plunger to push the case clear of the action and sometimes weaken and barely clear the action or worse seize up in the retracted position and provide no ejection. They can even seize in the extended position and not allow bolt to close on the case. There are debates about the effects on accuracy of the constant pressure of the plunger on the case head as opposed to the mechanical ejector which does not contact the case head when in battery.
Yes, email sales@parkwestarms.com for all special requests.
All we need to get started on your build is a 50% deposit.
Your firearm will need to be shipped to a licensed FFL.
That will be determined at the time of order. If you have a hunt planned, please let us know and we'll do our best to accommodate you.
Yes! Let us know what you have in mind.
Yes!